Information Guides

---

Widely used on cars from the 1970s onwards. The motor wires connect to this guide with 2 small eyelets. Preferred by many enthusiasts to  the Replacement G30 long stem guide blade. 

These guide blades can be connected to the motor wires with eyelets or on later models (1990 onwards) these guide blades simply pushed onto metal strips on the car base.

Introduced in 2001 to allow a lower front end on the cars. Originally in blue but later changed to black to stop interference with digital chips. The shaft length is 7.5 mm compared to 10 mm on the long stem guide blades

These guide blades reduce the plastic required on a guide change. The slot guide remains fixed to the car.

Modern version of the 360 degree spin blade - allows the car to rotate and run in the opposite direction. 

Fits most of the smaller 1:64 scale micro cars - up to the ones fitted with a screw